Tower Accessories
Beer Line Jumper 5' w/connectors
5 feet of clear 3/16" beer line. Includes nipples, hex nuts, clamps and rubber washers. Connects from the back of the shank to the keg coupler. Comes completely assembled.
Air Line Jumper 5' w/screw clamps
5 feet of 5/16" air line. One side clamps to the air nipple on your keg coupler and the other connects to the shut-off valve on your regulator. Clamp it tight using the included screw clamps.
Beer Line by the Foot
Assemble your own beer line. 3/16" inside diameter clear vinyl line. Food Grade. Use this for runs of 8' or less. Connecting hardware not included.
Tower Beer Line Jumper
This beer line is for single tap towers. Has the connection on one end to the keg coupler. The other end attaches inside your tower.
Air Line by the Foot
If you need more than 5' of airline you can grab it here by the foot. Inside diameter is 5/16". Food Grade. Connecting Hardware not included.
Air Line 5/16" I.D. Clear Vinyl Hose - 100' Coil
Make your own air line. 5/16" inside diameter fits standard Co2 beer regulators and equipment. Food grade. Hose will not rot, swell, or dry out and is unaffected by normal beer line cleaning chemicals. Connecting Hardware not included.