Keg Couplers
Low Profile US Sankey Keg Coupler
This is a US Sankey coupler that is made for when you have a tight squeeze at the top of your refrigerator. It will only stick up about 3/4" above the top rim of the keg. The beer line would screw onto one side and the air line slides over the nipple on the other side.
Draft Beer Foam Detection System
Foam detectors immediately shut down beer flow when keg empties. Beer lines stay full at all times eliminating foam and wasted beer.
Bass Ale Keg Coupler
Will fit Bass Ale, Watneys and Anchor Brewing products from San Francisco. Fits G System Keg Valves.
German Keg Coupler
Will fit most, but not all German made beers. Warsteiner, Hacker-Pschorr, Paulaner, Spaten. Fits A System Keg Valves. Will not fit Beck's or St. Pauli Girl, those are European Sankey.
European Sankey Keg Coupler - Lever Handle
Very similar to a US Sankey. The only difference is that the stem that goes into the keg is about a 1/4" longer on the European coupler. Fits Heineken, Amstel Light, Murphy's Stout, Scottish-New Castle, Pilsner Urquell and more. Fits S System Keg Valves.
US Sankey Lever Handle Coupler
99% of the beers brewed in the USA & Canada use this coupler. By far the most popular. This is the piece that actually attaches to your keg and taps it. There are six different types of keg couplers used in the world today.
Perlick Smart Coupler - US Sankey
This eliminates the line loss that normally follows every empty keg. Fresh kegs can be drawn off immediately. The beer lines are always full of beer.
Hoff-Stevens Keg Coupler - Twin Probe
This coupler is also used in the USA but on a very limited basis. Most brewers have completely switched to US Sankey couplers. Many home brewers use this type of coupler on older barrels. Please check with your beer retailer first to see if this is the coupler you need.